New Advantech ADAM-6000 Applicaiton-Ready Temperature Solutions

The integration of automation and enterprise systems requires a shift in the architecture of open control systems and can only be accomplished through Internet technology. In addition to general browser-based data acquisition applications, dedicated vertical market requirements such as temperature applications are becoming the trend of future automation. Answering this demand for an application-ready optimized solution, Advantech is introducing the new ADAM-6000 temperature measurement and control series, consisting of: ADAM-6022, a dual-loop temperature control module; ADAM-6015, a 7-channel RTD input module; and ADAM-6018, a 8-channel thermocouple input module.

The comprehensive temperature measurement and control solution provides users with high-speed Ethernet communication interface as well as built-in web page to allow browsing module status anywhere. Adopting a fast Ethernet network, these temperature modules support Modbus/TCP, TCP/IP & UDP Ethernet protocols to enable easy system integration and strong communication performance. Built-in web pages permit users to adopt standard web pages or customize their web pages via Advantech's JAVA Applet example program.

ADAM-6022
The new ADAM-6022 PID dual-loop controller targets temperature control applications. With control algorithm built-in, it provides 2 Analog Output, 6 Analog Input, 2 Digital Output, and 2 Digital Input channels combined into one module. Users can fill the parameters (Pv, Mv, & Sv) and set the operation mode (Auto/Manual/Free) through an easy-to-access utility software. Target markets include building automation and facility temperature control systems.

Part Number	Description
ADAM-6022	Ethernet-enabled Dual-loop PID Controller

ADAM-6015
The new ADAM-6015 7-channel RTD input module accepts a wide range of RTD sensor types, including Pt100, Pt1000, Ni50, Ni508, and Balco 500 series. Muti-input ranges are allowed in one module, creating a cost-effective solution. Most important of all, the ADAM-6015 supports open wiring diagnostic function which warns operators when the sensor wire is broken. It specifically aims at building and factory temperature monitoring applications.

Part Number	Description
ADAM-6015	7-channel RTD Input Module

ADAM-6018
The ADAM-6018 8-channel thermocouple input module is the best solution for T/C data acquisition based on the Ethernet. In addition to 8 T/C input channels, the ADAM-6018 is also equipped with 8 digital output channels such as auxiliary alarm outputs or pure outputs. Last but not the least, the ADAM-6018 comes with an external din-rail terminal board for wiring between the ADAM-6018 module and the field sensor. This special wiring mechanism greatly enhances the accuracy and reliability for thermocouple measurement in environmental and facility monitoring applications.

Part Number	Description
ADAM-6018	8-channel Thermocouple Input with Digital Output Module

>> Click here to see details on Advantech's complete line of ADAM-6000, temperature measurement and control series.

Advantech Automation Corporation
Your Complete eAutomation Solutions Manufacturer

---